In case you’re wondering what water stains are in the first place, then you should know that water stains are the damp portions of your roof or wall that look odd and gross. This is a common problem that most homes face and has to be taken care of as soon as possible before the condition worsens and spreads to other parts of the house.
It should be noted that repairing such water stains can be done in two ways – either DIY or through the help of professionals. It’s recommended that in case the affected condition is less severe then the following DIY trick will work, otherwise, for any serious case, you have to obtain help from the professionals, such as house painters in Auckland services.
Step 1: Know The Leak Source
When it comes to finding the source of a water strain, it’ll just be a simple job to perform. In most cases, the leak comes through any heating appliance or any leak in the plumbing system through which water is coming out. These leaks tend to leave various mineral deposits which are generally discoloured, dry and sometimes can smell very bad as well. Such smelly stains don’t look spectacular on the walls, does it?
Therefore, finding the leak’s source is important if you want to fix the stains. This step is utmost crucial and failing to do so will lead to a repair job that will turn out to be improper and thereby the condition will reappear later on. Unless you want to paint the same area, again and again, you should not proceed to the next step until you find the source of the leak.
Step 2: Prepping The Area
Once you’ve found the source and it has been sealed properly, it’s time to move to the water stain marks on the wall. Firstly, start cleaning the area with a solution of bleach along with water in a 1:3 ratio. In case you don’t have bleach in your home, then you can use any other bathroom cleaning solution as an alternative. This will help in removing mildew or mould, that might be present on the surface.
Once the cleaning has been done, it’s time to wait and let the area get dried up properly – so that painting on it can be easy – with the help of interior painters in Wellington services. You can even use a dehumidifier for the task as well.
Step 3: Start The Paint Job
Your first task would be to cover the affected area with a base primer first because unless you use a primer, your main paint will not work effectively. Always choose a mould-resistant, oil-based, stain-blocking primer. After application, wait for the primer to dry up.
After at least two hours of waiting, you can start with your paint job. And voila, your water stains will be gone for good.